產品名稱：促銷代理英國MONITRAN傳感器

MONITRAN
MONITRAN傳感器 MONITRAN編碼器 MONITRAN配件 MONITRAN選型
上海航歐代理英國MONITRAN傳感器，成立于1986年，是英國的優選振動傳感器制造商。Monitran對速度計、機械保護和維修渦流探頭的開發、生產和應用，使我們成為五大洲的相關行業工業商。Monitran的振動傳感器，固定和移動監測系統及其輔助設備，如傳感器，探頭，轉接器加速器探頭驅動器和電纜組件等產品為您提供可靠，**和成本效益的振動監測和測量。 Monitran產品通過ISO 9001:2008認證，Monitran的加速計用于監測，如水泵、電機、傳感器、加速器、探頭風機、發動機、探頭驅動器、傳動系統和機械振動等不同的應用范圍。

常用型號：
MTN/1185CM8-20
1185CMPG7-100
MTN/1185IC-50
MTN/1185-CM8-25F
MTN/1185CQ-20
MTN/1185CM-25
MTN/EP080
MTN/1187-10
MTN/1187CM8-1/219
MTN/IEAIW-75
MTN/1185IC-20
IEIRG050
MTN/1187-10
MTN/1188Q-1
MTN/1120IHCF1/4
MTN/1185ICM-25
MTN/MH008
MTN/1185
MTN/1187
VM120
Page
1100 General purpose accelerometers for non-hazardous areas 4
1100 Submersible accelerometers 4
1100 Hazardous area accelerometers 4
1100 Hazardous area accelerometers for submersible operation 4
1100 Dual accelerometers with temperature output 5
1100 Series lightweight and small footprint accelerometers 5
1000 Series TNC connector accelerometers5
Voltage driven accelerometers for non-hazardous areas5
High temperature accelerometers 5
Velocity output accelerometers6
Ultra lightweight accelerometers for modal analysis 6
Triaxial accelerometers6
Low frequency accelerometers 7
Charge output accelerometers 7
1185 Series shanghai hangou DC velocity output 8
1185 Series shanghai hangou DC velocity output for submersible operation 8
1185 Series shanghai hangou DC velocity output for hazardous area operation 8
8
1186 Series dual output velocity/AC acceleration 8
1186 Series dual output velocity/AC acceleration for submersible operation8
8
1188 Series dual output acceleration DC/AC 8
1181 Tri-output accelerometer8
Studs, adaptors, magnets and spikes, mounting tools9 & 10
Switch and connection boxes11
Junction boxes12
Vibration meters, kits and accessories13
Model 6000 12 channel monitor 14
Model 6050 4 channel monitor 14
Vibration switch15
410 & 415 Indicating vibration sensors15
Signal Conditioners15
Connectors, cable assemblies, diagnostic tools16
Probes, extension cables and drivers17
Monitran Limited, Monitor House, Hazlemere Road
Penn, Buckinghamshire. HP10 8AD, UK
Tel: +44 (0)1494 816569
Fax:+44 (0)1494 812256
info@shhangou.com
Web Site: www.shhangou.com
ACCELEROMETERS
VELOCITY AND ACCELERATION SHANGHAI HANGOU SALESS
MONITORING SYSTEMS
1185 Series shanghai hangou DC velocity output for submersible operation in hazardous areas 
1187 Series acceleration shanghai hangou saless for non-hazardous and hazardous areas
SWITCH, CONNECTION AND JUNCTION BOXES
MOUNTING ACCESSORIES
ELECTRICAL ACCESSORIES
EDDY CURRENT PROBES AND DRIVERS

PR01 Issue 4 GBPPage 2 of 18
March 2010
 
NOTES
1Cables: The standard length of integral cables is 5 shanghai hangou saleses. Unless specifically stated on your purchase order we 
will supply this length. Additional cable is available at the prices shown in the relevant section of the list.
2Mounting: Please specify the mounting required on your order. See the relevant datasheet on our website.
3Sensitivity or range: Please specify sensitivities e.g. mV/g, mm/sec, g as appropriate. See the relevant 
datasheet on our website.
4ATEX and IECEx: All certified intrinsically safe accelerometers require a safety barrier or isolator to comply with 
ATEX/IECEx regulations. Please see the relevant datasheet for information. We recommend these are obtained 
from the manufacturer or electonics component distributor.
5All orders not available from stock will be acknowledged by fax or email. Please check the details on receipt as 
changes to the order cannot be accepted once production has started. If no acknowledgement is received within 
3 days of ordering please contact the sales department.
6Most products are made to order and standard delivery times for accelerometers is 4 weeks, depending upon 
order levels and factory output. We will do our best to meet more urgent delivery times, if possible.  
7Small quantities may sometimes be available from stock, especially if you are able to be flexible regarding 
sensitivity, connection and mounting types.
8VM110 and VM120 Vibration meter kits are usually on a 7 day delivery
9All prices on this list are ex-works, Penn, UK exclusive of VAT, packing or carriage.
10UK packing and delivery charge is shanghai hangou sales1556 for 10Kg by overnight carrier. Consult the sales office for rates for 
heavier packages.
11We are pleased to despatch goods overseas by prepaid courier service which will be billed at the time of invoice 
for account customers and on the proforma invoice for all others.
12We will also despatch by customer's own courier or freight forwarder on a freight forward basis in which case a 
packing and handling charge will be added to the order.
13Vibration products are commodity code: 90318098
14Origin, all goods are manufactured in UK and this will be declared on the Commercial Invoice. Certificates of 
Origin issued by the Local Chamber of Commerce (LCCI) will be charged at shanghai hangou sales4056
15A calibration certificate is supplied free of charge with all accelerometers, vibration meters and monitors.
16Datasheets for all products and ISO9001 certificates are available from our website free of charge.
17Payment may be made by:
Cheque, all major credit cards except American Express, or by bank transfer to:
HSBC Bank, 1 Cornmarket, High Wycombe, Bucks, HP11 2AY, ENGLAND
  Account                 21289934
  Sort Code              40-24-17
  Swift Code             MIDLGB22
  IBAN                     GB63 MIDL40 2417 2128 9934
18All prices are in pounds sterling but non-UK customers may pay in Euro or $US if requested at the time of 
ordering. The sales office will confirm the company's rate of exchange at time of order..
19Payment terms will be specified on the Order Acknowledgement.
20We reserve the right to make a minimum order charge of shanghai hangou sales50 or increase the quantity ordered to meet this 
value.
Payment
Delivery times
Product
Acknowledgement
Carriage 
Documentation

PR01 Issue 4 GBPPage 3 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/1100Accelerometer, 100mV/g, top entry, 2 pin MS connectorshanghai hangou sales
MTN/1100CAccelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE 
MTN/1100SAccelerometer, 100mV/g, side entry, 2 pin MS connectorshanghai hangou sales
MTN/1100SCAccelerometer, 100mV/g, side entry, 5 shanghai hangou saleses armoured ETFE
Extra twin core, screened, overbraided ETFE cable,
MTN/1100WSubmersible accelerometer, 100mV/g, top entry waterproof gland, 5 shanghai hangou saleses 
PU waterproof shanghai hangou salest
MTN/1100SWSubmersible accelerometer, 100mV/g, side entry waterproof gland, 5 shanghai hangou saleses 
PU waterproof shanghai hangou salestr
Extra three-core, polyurethane, waterproof cable,
MTN/1100IATEX/IECEx approved accelerometer, 100mV/g, top entry, 2 pin MS
MTN/1100ICATEX/IECEx approved accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses 
armoured ETFE cableshanghai hangou sales
MTN/1100ISATEX/IECEx approved accelerometer, 100mV/g, side entry, 2 pin MS 
MTN/1100ISCATEX/IECEx approved accelerometer, 100mV/g, side entry, 5 shanghai hangou saleses 
armoured ETFE cableshanghai hangou sales
Extra twin core, screened, overbraided ETFE cable, per
Hazardous area accelerometers require safety barriers. Contact the sales 
office for details.
MTN/1100IWATEX/IECEx approved accelerometer for submersible operation, 100mV/g, 
top entry, 5 shanghai hangou saleses PU waterproof shanghai hangou salestr
MTN/1100ISWATEX/IECEx approved accelerometer for submersible operation, 100mV/g, 
side entry, 5 shanghai hangou saleses PU waterproof shanghai hangou salest
Extra three-core, polyurethane, waterproof cable, per shanghai hangou saleseshanghai hangou sales
Hazardous area accelerometers require safety barriers. Contact the sales 
office for details.
Other sensitivities and various mountings available at no extra cost, refer to 
datasheet, website or sales office
IMPORTANT: Please specify sensitivity, cable length and mounting when ordering
1100 Hazardous area accelerometers 
1100 Hazardous area accelerometers for submersible operation 
1100 General purpose accelerometers for non-hazardous areas 
1100 Submersible accelerometers 
ACCELEROMETERS AND 
ACCESSORIES
Price
ACCELEROMETERS
The 1100 Series
A versatile range of constant current accelerometers for condition monitoring for use 
with data collectors and on-line data systems. Versions for non-hazardous and 
hazardous areas and underwater operation.


PR01 Issue 4 GBPPage 4 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/1100TAccelerometer, 100mV/g, 10mV/oC, top entry, 3 pin 62GB connectorshanghai hangou sales
MTN/1100TCAccelerometer, 100mV/g, 10mV/oC, top entry, 5 shanghai hangou saleses armoured ETFE met
MTN/1100STAccelerometer, 100mV/g, 10mV/oC, side entry, 3 pin 62GB connectorshanghai hangou sales
MTN/1100STCAccelerometer, 100mV/g, 10mV/oC, side entry, 5 shanghai hangou saleses armoured ETFE 
Extra three core, screened, overbraided ETFE cable, per shanghai hangou salese
1100 Series lightweight and small footprint accelerometers 
MTN/1120Accelerometer, 100mV/g, either side entry with 5 shanghai hangou saleses amoured ETFE 
cable or top entry with 62GB connector, any mounting as shown on the 
datasheet.shanghai hangou sales14056shanghai hangou sales
MTN/1130Accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE cable, any 
mounting as shown on the datasheet.met
MTN/1135Accelerometer, 100mV/g, side entry, 5 shanghai hangou saleses armoured, shanghai hangou core, ETFE 
cable, includes adaptershanghai hangou sales
MTN/1140Accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE cable, any 
mounting as shown on the datasheet.met
MTN/1170Accelerometer, 100mV/g, top entry, 2 pi MS connector, any mounting as 
shown on the datasheet.
MTN/1830SAccelerometer, 100mV/g, side entry, 5 shanghai hangou saleses armoured ETFE
Extra shanghai hangou or twin core, screened, armoured ETFE cable, per shanghai hangou salese
1000 Series TNC connector accelerometers
MTN/1010Accelerometer, 100mV/g, top entry, TNC connecto
MTN/1020Accelerometer, 100mV/g, top entry, small body, TNC connecto
Voltage driven accelerometers for non-hazardous areas
MTN/1107CAccelerometer, 100mV/g, 3 wire, 24VDC, top entry, 5 shanghai hangou saleses ETFE 
armoured cablemet
MTN/1109CAccelerometer, 100mV/g, 3 wire, -24VDC, top entry, 5 shanghai hangou saleses ETFE 
armoured cableshanghai hangou sales
Extra twin core, screened, overbraided ETFE cable, per shanghai hangou salese
Voltage driven accelerometers for hazardous areas
MTN/1107ICATEX approved accelerometer for hazardous area operation, 100mV/g, 3 
wire, +24VDC, top entry, 5 shanghai hangou saleses ETFE armoured cable
MTN/1109ICATEX approved accelerometer for hazardous area operation, 100mV/g, 3 
wire, -24VDC, top entry, 5 shanghai hangou saleses ETFE armoured cable
Extra twin core, screened, overbraided ETFE cable, per shanghai hangou salese
High temperature accelerometers 
MTN/1105CEAccelerometer, top entry, with encapsulated in-line charge amplifier, 100mVg 
o/p, 5m low noise high temperature cable, 5 shanghai hangou saleses armoured ETFE cable 
(Max. temperature 180oC)
Extra twin core, screened, armoured ETFE cable, per 
Extra low noise, high temperature cable, per shanghai hangou salesemet
NOTESOther sensitivities and various mountings available at no extra cost, refer to 
datasheet, website or sales office
IMPORTANT: Please specify sensitivity, cable length and mounting when ordering
All above sensors have either a 1/4"-28UNF female or Quickfit base and will 
be supplied with any mounting stud or Quickfit adaptor specified on your 
order at no extra charge
ACCELEROMETERS AND 
ACCESSORIES
ACCELEROMETERS CONTINUED
Price
1100 Dual accelerometers with temperature output 

PR01 Issue 4 GBPPage 5 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
Velocity output accelerometers
MTN/1600Velometer, 4mV/mm/sec, top entry, 2 pin MS connectorshanghai hangou sales
MTN/1600CVelometer, 4mV/mm/sec, top entry, 5 shanghai hangou saleses armoured ETFE
Extra twin core, screened, armoured ETFE cable, per shanghai hangou salese
Ultra lightweight accelerometers for modal analysis 
MTN/1800Accelerometer, 1V/g, top entry, 5m lightweight ETFE cable with BNC
MTN/1810Accelerometer, 100mV/g, top entry, 5m lightweight ETFE cable with BNC 
plugshanghai hangou sales
Additional cable, per shanghai hangou salese
Above are adhesive mount, specify cable length on order
Triaxial accelerometers
MTN/1310Triaxial accelerometer with in-line charge amplifiers giving 10mV/g 
simultaneously for each channel. Includes 5 m overbraided PVC cable 
between accelerometer and amplifier module plus 1 shanghai hangou salese after. Small 4 
point mounting, includes 4 x M3 boltsshanghai hangou sales
Additional cable, per shanghai hangou salese
MTN/1210Biaxial accelerometer with in-line charge amplifiers giving 10mV/g 
simultaneously for each channel. Includes 5 m overbraided PVC cable 
between accelerometer and amplifier module plus 1 shanghai hangou salese after. Small 4 
point mounting, includes 4 x M3 boltsshanghai hangou sales
Additional cable, per shanghai hangou salese
ACCELEROMETERS CONTINUED
Price
ACCELEROMETERS AND 
ACCESSORIES
MTN/1310 Series Triaxial Accelerometers
Allow measurements in three planes simultaneously. The small, lightweight accelerometer 
head is connected via a multicore cable and in-line charge amplifiers to give a 10mV/g output 
for each channel.


PR01 Issue 4 GBPPage 6 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/7000Low frequency accelerometer, 100mV/g AC output, small four point mount, 
24VDCshanghai hangou sales
MTN/7010Low frequency accelerometer, 100mV/g AC output, large four point mount, 
24VDCshanghai hangou sales
MTN/7020Low frequency accelerometer, 100mV/g AC output, shanghai hangou point mount, 
24VDCshanghai hangou sales
Above all supplied with 5 shanghai hangou saleses overbraided cable. Specify range in g
MTN/7100Low frequency accelerometer, strain gauge output, small four point mountmet
MTN/7110Low frequency accelerometer, strain gauge output, large four point mountshanghai hangou sales
MTN/7120Low frequency accelerometer, strain gauge output, shanghai hangou point mountshanghai hangou sales
Above all supplied with 5 shanghai hangou saleses overbraided cable. Specify range in g
MTN/7200Low frequency accelerometer, 4-20mA output, small four point mountshanghai hangou sales
MTN/7210Low frequency accelerometer, 4-20mA output, large four point mountshanghai hangou sales
MTN/7220Low frequency accelerometer, 4-20mA output, shanghai hangou point mountshanghai hangou sales
Above all supplied with 5 shanghai hangou saleses overbraided cable. Specify range in g
MTN/P1100Accelerometer, charge output, 1100pC/g, TNC connectorshanghai hangou sales
MTN/P100TAccelerometer, charge output, 20pC/g, top entry microdot connectormet
MTN/P100Accelerometer, charge output, 20pC/g, side entry microdot connectormet
MTN/P50Accelerometer, charge output, 50pC/g, side entry cable, 5 shanghai hangou saleseshanghai hangou sales
MTN/P05Accelerometer, charge output, 5pC/g, side entry cable, 5 shanghai hangou saleseshanghai hangou sales
MTN/CA003In-line charge amplifier in stainless steel enclosure with connectors, 2mV/pC 
output. (e.g. gives 40mV/g with P100)shanghai hangou sales
MTN/CA051Cable assembly, microdot to microdot, low noise PVC, 5 shanghai hangou salese
Additional cable at shanghai hangou sales
IMPORTANT: Please specify sensitivity, cable length and mounting when ordering
Charge output accelerometers 
MTN700 Series Piezoresistive Low Frequency Accelerometers
Low frequency accelerometers in 3 body styles for 24VDC, strain gauge amplifier or 4-20mA 
operation. Measures down to DC and will always measure 1g when mounted in the vertical axis 
due to gravity. Supplied with 5 shanghai hangou salese integral cable, extra length available on request. For use 
only in non-hazardous areas.
ACCELEROMETERS AND 
ACCESSORIES
Price
Low frequency accelerometers 


PR01 Issue 4 GBPPage 7 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
1185 Series shanghai hangou DC velocity output 
MTN/11852PVelocity shanghai hangou sales, top entry, 2 pin MS connector, specify rangeshanghai hangou sales
MTN/1185Velocity shanghai hangou sales, top entry, 3 pin 62GB connector, specify rangeshanghai hangou sales
MTN/1185CVelocity shanghai hangou sales, top entry, 5 shanghai hangou salese armoured ETFE cable, specify rangeshanghai hangou sales
1185 Series shanghai hangou DC velocity output for submersible operation 
MTN/1185WVelocity shanghai hangou sales, top entry waterproof gland, 5 shanghai hangou saleses PU waterproof 
shanghai hangou salestr
Waterproof PU cable, per shanghai hangou salesemet
1185 Series shanghai hangou DC velocity output for hazardous area operation 
MTN/1185ICATEX approved, intrinsically safe velocity shanghai hangou sales, top entry 5 shanghai hangou salese 
armoured ETFE cable, specify rangeshanghai hangou sales
1185 Series shanghai hangou DC velocity output for submersible operation in hazardous areas 
MTN/1185IWATEX approved, intrinsically safe velocity shanghai hangou sales, 5 shanghai hangou saleses PU 
waterproof shanghai hangou salestr
Waterproof PU cable, per shanghai hangou saleseshanghai hangou sales
1185 Series dual output velocity/temperature 
MTN/1185TCDual output velocity/temperature shanghai hangou sales, specify velocity range, 
10mV/oC, 5 shanghai hangou salese armoured ETFE cableshanghai hangou sales
1186 Series dual output velocity/AC acceleration 
MTN/1186Dual output velocity/AC shanghai hangou sales, 3 pin 62GB connector, specify rangeshanghai hangou sales
MTN/1186CDual output velocity/AC shanghai hangou sales, 0-20mm/sec, 100mV/g, 5 shanghai hangou salese 
armoured ETFE cable,  specify velocity rangemet
1186 Series dual output velocity/AC acceleration for submersible operation
MTN/1186WDual output velocity/AC shanghai hangou sales,100mV/g, waterproof gland, 5 shanghai hangou saleses PU 
waterproof cable cable, specify velocity rangemet
Waterproof PU cable, per shanghai hangou saleseshanghai hangou sales
1187 Series acceleration shanghai hangou saless for non-hazardous and hazardous areas
MTN/11872PAcceleration shanghai hangou sales, specify g range, top entry, 2 pin MS connectormet
MTN/1187CAcceleration shanghai hangou sales, specify g range, top entry, 5 shanghai hangou salese armoured ETFE 
cablemet
MTN/1187ICATEX approved, intrinsically safe acceleration shanghai hangou sales, top entry 5 shanghai hangou salese 
armoured ETFE cable, 5 shanghai hangou salese, specify g rangeshanghai hangou sales
1188 Series dual output acceleration DC/AC 
MTN/1188Dual output RMS g (4-20mA)/AC (mV/g) acceleration shanghai hangou sales, specify g 
range, 3 pin 62GB connectorshanghai hangou sales
MTN/1188CDual output RMS g (4-20mA)/AC (mV/g) acceleration shanghai hangou sales, specify g 
range, 5 shanghai hangou salese armoured ETFE cableshanghai hangou sales
Additional 3 core ETFE cable, per shanghai hangou saleseshanghai hangou sales4.50shanghai hangou sales4.50shanghai hangou sales4.50
1181 Tri-output accelerometer
MTN/1181CTriple output velocity/envelope g/AC acceleration shanghai hangou sales, 5 shanghai hangou salese PVC 
cable, specify g rangeshanghai hangou sales
Extra 6 core PVC, screened cableshanghai hangou sales
Extra twin core, screened, armoured ETFE cable, per shanghai hangou saleseshanghai hangou sales
Three-core, polyurethane, waterproof cable, per shanghai hangou saleseshanghai hangou sales
Various sensitivities and mountings available at no extra cost, refer to 
datasheet, website or sales office
IMPORTANT: Please specify sensitivity, cable length and mounting when ordering
The 118X Series
A versatile range of 4-20mA output shanghai hangou saless for overal vibration monitoring for use with 
PLC's and other controllers. RMS velocity or acceleration output depending on version. 
Versions for submersible and hazardous area operation. Dual output options with temperature 
and AC output. A wide selection of ranges is available as shown on the data sheet, please 
specify range required on your order. Consult the sales office for assistance.
Price
ACCELEROMETERS AND 
ACCESSORIES
VELOCITY AND ACCELERATION SHANGHAI HANGOU SALESS


PR01 Issue 4 GBPPage 8 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/MS001Quick-fit to glue studshanghai hangou sales3.20metshanghai hangou sales2.70
MTN/MS002Quick-fit to M8 male studshanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS003Quick-fit to M10 male studshanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS004Quick-fit to 1/4"UNF male studshanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS005Quick-fit to 1/4"UNF femaleshanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS006Quick-fit to M6 male studshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS007Quick-fit to 10-32UNF femaleshanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS008Quick-fit to M8 female studshanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS00910-32UNF to male glue studshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS010Quick-fit to glue stud (for 1020Q/1120Q series)shanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS0131/4"-28UNF male to glue studshanghai hangou sales3.20shanghai hangou sales356shanghai hangou sales2.70
MTN/MS01410-32UNF male to glue studshanghai hangou sales3.20shanghai hangou sales356shanghai hangou sales2.70
MTN/MS055Quick-fit to M8 male stud (for 1020Q/1120Q series)shanghai hangou sales3.20shanghai hangou sales2.70
MTN/MS0671/4"-28UNF to M8shanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS0361/4"-28UNF to M6shanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS1241/4"-28UNF to M10shanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS1321/4"-28UNF to M12shanghai hangou sales3.50shanghai hangou sales3.20met
MTN/MS02410-32 UNF grub screwshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS032M6 x 12mm grub screwshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS0681/4"-28UNF grub screwshanghai hangou sales3.50shanghai hangou sales3.20shanghai hangou sales
MTN/MS11Quick-fit female - 1/4" UNF malemet
MTN/MS15Quick-fit female - 10-32 UNF maleshanghai hangou sales
MTN/MS034Isolation Adaptor 1/4"-28UNF male to 1/4"-28UNF femaleshanghai hangou sales
MTN/MS062Isolation Adaptor 10-32UNF male to 10-32UNF malemet
MTN/MS093Isolation Adaptor Q/F male to M8 maleshanghai hangou sales
MTN/MS112Isolation Adaptor M8 male to M8 femaleshanghai hangou sales
MTN/MM0011/4"-28UNF male, 35mm, 2 pole type, 20kgsmet
MTN/MM00210-32UNF male, 19mm, 7kgsshanghai hangou sales
MTN/MM0031/4"-28UNF male, 38mm, 2 pole typemet
MTN/MM00410-32UNF male, 35mm, 2 pole type, 20kgsshanghai hangou sales
MTN/MM005Quick-fit male, 35mm, 2 pole type, 20kgsmet
MTN/MM006M6 female, 19mm, 7kgsshanghai hangou sales
MTN/MM007M8 female, 35mm, 2 pole type, 20kgsmet
MTN/MM0081/4"-28UNF male 25.35mm, 2 pole type, 11kgsshanghai hangou sales
MTN/MM00910-32UNF male, 25mm, 2 pole typemet
MTN/MM010Quick-fit male, 25mm, 2 pole typemet
MTN/MM0231/4"-28UNF female, 35mm, 20kgs shanghai hangou sales
MTN/MM027M10 female, 35mm, 2 pole typeshanghai hangou sales
ACCELEROMETERS AND 
ACCESSORIES
Magnets 
MOUNTING ACCESSORIES
Price
Quickfit Mounting Studs 
Male mounting studs and grub screws 
Isolation Adaptors
Adaptors 

PR01 Issue 4 GBPPage 9 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/PS0011/4" UNF standard spike, 25mmshanghai hangou sales
MTN/PS0021/4" UNF standard spike, 100mmmet
MTN/PS0031/4" UNF standard spike, 150mmmet
MTN/PS0041/4" UNF standard spike, 200mmshanghai hangou sales
MTN/PS00510-32 UNF standard spike, 25mmshanghai hangou sales
MTN/PS00610-32 UNF standard spike, 100mmshanghai hangou sales4
MTN/PS00710-32 UNF standard spike, 150mmshanghai hangou sales
MTN/PS00810-32 UNF standard spike, 200mmshanghai hangou sales
MTNMH001M8 spot face toolmet
MTN/MH010Mounting stud adhesive (liquid steel type), for 20 -25 glue-on adaptorsmet
All above fittings are in stainless steel
Other fittings available, please consult Sales Office
Tools 
ACCELEROMETERS AND 
ACCESSORIES
MOUNTING ACCESSORIES (continued)
Price
Hand Held Spikes 

PR01 Issue 4 GBPPage 10 of 18
March 2010
 
Part NoDescription
1-10 Units11+ Units
MTN/3002Switch box, 2 channels, painted mild steel, IP65met
MTN/3004Switch box, 4 channels, painted mild steel, IP65met
MTN/3006Switch box, 6 channels, painted mild steel, IP65met
MTN/3008Switch box, 8 channels, painted mild steel, IP65shanghai hangou sales
MTN/3010Switch box, 10 channels, painted mild steel, IP65shanghai hangou sales
MTN/3012Switch box, 12 channels, painted mild steel, IP65met
MTN/3014Switch box, 14 channels, painted mild steel, IP65shanghai hangou sales
MTN/3016Switch box, 16 channels, painted mild steel, IP65met
MTN/3018Switch box, 18 channels, painted mild steel, IP65shanghai hangou sales
MTN/3020Switch box, 20 channels, painted mild steel, IP65shanghai hangou sales
MTN/3025Switch box, 25 channels, painted mild steel, IP65shanghai hangou sales
MTN/3040Switch box, 40 channels, painted mild steel, IP65shanghai hangou sales
MTN/3064Switch box, 64 channels, painted mild steel, IP65shanghai hangou sales
shanghai hangou sales5056
For combinations of the above please contact the sales office
Additional one-off charge for interface module for data collector compatibility
MTN 3000C Connection box
Multiple BNC connectors can be provided in place of the rotary switch at the same cost. Add "C" to the part 
number. The price will be that of the switched unit with the same number of channels.
MTN 3000-DC Switch box
For 7000 Series DC sensors. Add "-DC" to the part number. The price will be that of the standard unit with 
double the number of channels. The 7000 series requires an independent 24VDC supply
MTN 3000-DA Switch box
For dual vibration output sensors (MTN1186, MTN1188). Provides switch selection of AC output to the BNC 
and direct connection of the 4-20mA output of each sensor to the external controller. Add "-DA" to the part 
number. A separate 24VDC power supply will be required. The price will be that of the standard unit with 
double the number of channels
MTN 3000-DT Switch box
For dual output AC vibration/temperature sensors (MTN1100T/WT/TC). Provides switch selection of AC 
and temperature outputs to two BNC connectors. Add "-DT" to the part number. The price will be that of the 
standard unit with double the number of channels.
SWITCH, CONNECTION 
AND JUNCTION BOXES
SWITCH AND CONNECTION BOXES
Price
MTN-3000-GRP Switch box
For GRP (Glass Reinforced Plastic) instead of painted steel box add "-GRP" to the part number and add 
shanghai hangou sales8056 to the price.
MTN 3000 Switch and connection boxes
For remote connection of a number of constant current AC accelerometers to a data logger via 
a rotary selector switch and isolated BNC connector (Switchbox) or individual BNCs 
(Connection Box). Connect to prewired terminals inside through cable glands supplied. Choice 
of box material, all IP65 rated.
MTN-3000-SS Switch box
For stainless steel instead of painted mild steel box add "-SS" to the part number and shanghai hangou salesto the price. 
Undrilled, user to drill enties.
Any number of inputs available. Please enquire for intermediate and/or additional channels. 
Alternative connectors also available, TNC, 2 pin MS etc.


PR01 Issue 4 GBPPage 11 of 18March 2010
 
Part NoDescription
1-10 Units11+ Units
MTN/9002-HD2 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9003-HD3 way junction box, die cast,  painted, IP65met
MTN/9004-HD4 way junction box, die cast,  painted, IP65met
MTN/9005-HD5 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9006-HD6 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9007-HD7 way junction box, die cast,  painted, IP65met
MTN/9008-HD8 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9009-HD9 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9010-HD10 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9011-HD11 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9012-HD12 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9025-HD25 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9040-HD40 way junction box, die cast,  painted, IP65shanghai hangou sales
MTN/9002-GRP2 way junction box, GRP, IP65met
MTN/9003-GRP3 way junction box, GRP, IP65met
MTN/9004-GRP4 way junction box, GRP, IP65shanghai hangou sales
MTN/9005-GRP5 way junction box, GRP, IP65shanghai hangou sales
MTN/9006-GRP6 way junction box, GRP, IP65me
MTN/9007-GRP7 way junction box, GRP, IP65shanghai hangou sales
MTN/9008-GRP8 way junction box, GRP, IP65met
MTN/9009-GRP9 way junction box, GRP, IP65shanghai hangou sales
MTN/9010-GRP10 way junction box, GRP, IP65shanghai hangou sales
MTN/9011-GRP11 way junction box, GRP, IP65met
MTN/9012-GRP12 way junction box, GRP, IP65met
MTN/9002-ABS2 way junction box, ABS, IP65met
MTN/9003-ABS3 way junction box, ABS, IP65met
MTN/9004-ABS4 way junction box, ABS, IP65shanghai hangou sales
MTN/9005-ABS5 way junction box, ABS, IP65met
MTN/9006-ABS6 way junction box, ABS, IP65met
MTN/9007-ABS7 way junction box, ABS, IP65met
MTN/9008-ABS8 way junction box, ABS, IP65met
MTN/9009-ABS9 way junction box, ABS, IP65met
MTN/9010-ABS10 way junction box, ABS, IP65shanghai hangou sales
MTN/9011-ABS11 way junction box, ABS, IP65shanghai hangou sales
MTN/9012-ABS12 way junction box, ABS, IP65shanghai hangou sales
Consult the sales office for other sizes
MTN9000-GRP Series Junction Boxes 
Local junction boxes as above in glass reinforced plastic (GRP), IP65 rating
MTN9000-ABS Series Junction Boxes 
Local junction boxes as above in acrylonitrile butadiene styrene (ABS), IP65 rating
MTN900 Series Junction Boxes
Local Junction Boxes to marshal connections from a number of sensors to connect to 6000 
monitor, 3000 switchboxes or other controller. Glands provided for input and output cables. 
Specify any special drilling required.
SWITCH, CONNECTION 
AND JUNCTION BOXES
JUNCTION BOXES
MTN9000-HD Series Junction Boxes 
Local junction boxes as above, die cast mild steel, painted.
Price

PR01 Issue 4 GBPPage 12 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
VM110 or VM120
Hand held probe and coiled cable assembly, extends to 2 shanghai hangou saleses
Magnetic base, 2 pole, 35mm dia, 20Kg force, fits in hand held probe
Spike probe, stainless steel, 100mm, fits in hand held probe
Carrying case with foam cutouts
Instruction booklet
Calibration certificate
MTN/VM110KVM110, probe, cable, magnet, spike, case - kit as aboveshanghai hangou sales
MTN/VM120KVM120, probe, cable, magnet, spike, case - kit as aboveshanghai hangou sales
MTN/VM110Meter onlymet
MTN/VM120Meter onlymet
MTN/2100Hand held accelerometer probe with coiled cable (CA418), 1/4"-28UNF 
female mountingshanghai hangou sales15556shanghai hangou sales14356shanghai hangou sales13256
MTN/CA418Coiled cable assembly TNC to IA110 for use with MTN/2100 hand-held 
probeshanghai hangou sales4556shanghai hangou sales4256shanghai hangou sales3856
MTN/1100Accelerometer, 100mV/g, top entry, 2 pin MS connectormet
MTN/CA042Coiled cable assembly 2 pin MS to IA110 for use with MTN/1100shanghai hangou sales
MTN/1020Accelerometer, 100mV/g, top entry, TNC connectormet
MTN/CA043Coiled cable assembly TNC to IA110 for use with MTN/1020shanghai hangou sales
MTN/MM001Magnetic base, 1/4"-28UNF male, 2 pole, 35mm dia, 20Kg forcemet
MTN/PS001Spike probe, stainless steel, 25mm, 1/4"-28UNF maleshanghai hangou sales
MTN/PS002Spike probe, stainless steel, 100mm, 1/4"-28UNF maleshanghai hangou sales
MTN/PS003Spike probe, stainless steel, 150mm, 1/4"-28UNF maleshanghai hangou sales
MTN/PS004Spike probe, stainless steel, 200mm, 1/4"-28UNF maleshanghai hangou sales
MTN/HE001Carrying case with foam cutoutsshanghai hangou sales
MTN/RC0100Recalibration, recommended annuallyshanghai hangou sales
Accessories 
Recalibration 
Price
Standard Meter Kits
Meters 
MONITORING SYSTEMS
VIBRATION METERS
Vibration Meters
The VM110 and VM120 are easy to operate portable vibration meters for routine 
measurements on rotating machinery components. Large digital display in a rugged case with 
built-in stand. Operates with a wide range of constant current and charge output 
accelerometers, powered by 2 x PP3 batteries. 


PR01 Issue 4 GBPPage 13 of 18March 2010
 
Part NoDescription
1-10 Units11+ Units
Model 6000 12 channel monitor 
MTN/6000
MTN/HE003Wall mounted enclosure to accommodate shanghai hangou rackshanghai hangou sales25056shanghai hangou sales23156
MTN/HE004Wall mounted enclosure to accommodate two racksshanghai hangou sales35056shanghai hangou sales32456
MTN/6200 
MTN/6100V
MTN/6100GVibration module as above but measuring acceleration (g)
MTN/6500-1Temperature module for AD590, 1μA/oK output temperature sensormet
MTN/6500-2Temperature module for PT100 2 wireshanghai hangou sales
MTN/6500-3Temperature module for PT100 3 wireshanghai hangou sales
MTN/6500-4Temperature module for 10mV/oC output temperature sensorshanghai hangou sales
MTN/MH007Flashing light and sirenshanghai hangou sales
MTN/MH099Flashing light onlyshanghai hangou sales20056shanghai hangou sales18556
A complete 6000 system consists of an electronics rack with power supply, 
display, various signal input cards (one reqired for each sensor input) in an 
IP65 enclosure with up to 12 accelerometers, temperature sensors or eddy 
current probes. See the relevant sections for individual sensor prices.
Any complete 6000 monitoring system including 6 or more channels and 
sensors will receive a 5% overall discount.
Model 6050 4 channel monitor 
MTN/6050-65
MTN/6200 
MTN/6050-4V
MTN/6050-4VT
MONITORING SYSTEMS
MONITORING SYSTEMS
Price
19" rack with on board mains power supply, input 85-264 volts AC, capable of taking up 
to 12 channels
Four channel monitor including wall mounted enclosure with on board mains power 
supply, input 85-264 volts AC
Display module providing via a BNC a buffered AC output to enable a data-collector to be 
connected for more detailed analysis
Vibration module measuring velocity (mm/sec) complete with 2 pre-set alarms and 1 TDX 
alarm, 4-20mA output and 0-10 volts output
Complete 4 channel vibration and temperature protection system with 4 x MTN/1100T 
vibration sensors, MTN/6050-65 4 channel monitor in wall mounted rack, MTN/6200 
display unit, 2 vibration modules and 2 temperaure modules
Display module providing via a BNC a buffered AC output to enable a data-collector to be 
connected for more detailed analysis
MTN/6000 Shut Down Protection System
Multi-channel monitoring system with up to 12 vibration or temperature inputs per rack. Any 
number of racks may be accommodated within user's own 19" control rack or optional 
dedicated enclosure. Relay outputs for alarms and  shutdown plus 4-20mA and 0-10V signal 
outputs for data logging and A/C output for vibration analysis.  
Add the required number of accelerometers, temperature sensors and eddy current 
probes together with matching quantity of modules as required by the system. Contact 
Sales Department for advice or a quotation.
Complete 4 channel vibration protection system with 4 x MTN/1100 vibration sensors, 
MTN/6050-65 4 channel monitor in wall mounted rack, MTN/6200 display unit and 4 
vibration modules


PR01 Issue 4 GBPPage 14 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units
MTVS0004
-010shanghai hangou sales32056shanghai hangou sales29656
MTVS0004
-011
As above but with latching alarm relays
MTVS0004
-013shanghai hangou sales20056shanghai hangou sales18556
MTVS0004
-014
As above but with latching alarm relays
MTN/1100Cshanghai hangou sales14056shanghai hangou sales13056
OR select any alternative accelerometer with 100mV/g output
Extra twin core, screened, armoured ETFE cable, per shanghai hangou saleseshanghai hangou sales356shanghai hangou sales356
MTN/CA067shanghai hangou sales1556shanghai hangou sales1456
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/410Velocity sensor with integral display, 0-99mm/sec RMS velocity, internal 
battery. Approx 500 readingsshanghai hangou sales
MTN/415Velocity sensor with integral display, 0-20g RMS acceleration, internal 
battery. Approx 500 readingsmetshanghai hangou sales
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/8006*Vibration module, provides velocity output as 4-20mA signal from constant 
current accelerometers plus AC output, DIN rail mounted. Specify range on 
ordershanghai hangou sales
MTN/8065*Tri-output module, provides velocity and envelope g signals as 0-10V DC 
signals from AC output constant current sensors plus AC output, DIN rail 
mounted. Specify ranges on ordermet
* When ordered in conjunction with an accelerometer the price will be discounted by 20%
MTN/8066
G-mac module gives 4-20mA or 0-10V outputs for velocity and peak g along 
with native buffered AC output, Ranges and filters switch selectable by user.shanghai hangou sales
Many other conditioning modues for alternative signal inputs and outputs are available to order 
Accelerometer, 100mV/g, top entry, 5 shanghai hangou saleses armoured ETFE cable
MONITORING SYSTEMS
VIBRATION SWITCH
Vibration Switch
Die cast box with LED's indicating status and two relays for alarm/shut down.  230VAC, 
115VAC and/or 24V DC operation, 4-20mA output.
Vibration switch including built-in accelerometer, range up tp 50mm/sec, high and low 
non-latching alarm relays. 4-20mA output, operating voltage 230VAC, 115VAC or 24VDC
Price
Price
BNC plug and strain relief fitted to MTN1100C to connect to VS0004-013 or -014
SIGNAL CONDITIONERS
Price
INDICATING VIBRATION SENSOR
Self contained, battery operated vibration sensor with integral digital display. Tap to operate. 
Displays reading for 60 seconds.
Signal conditioning modules converting AC signals from constant current sensors to DC current 
or voltage for input to PLCs or other industrial controllers for continuous monitoring in DIN 
railmounting enclosure
Vibration switch, range up to 50mm/sec, high and low non-latching alarm relays. BNC 
socket for external 100mV/g AC accelerometer, 4-20mA output, operating voltage 
230VAC or 115VAC. 





PR01 Issue 4 GBPPage 15 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/MH0022 pin MS mating connector, femaleshanghai hangou sales
MTN/MH0083 pin 62GB mating connector, femaleshanghai hangou sales
MTN/CA067BNC plug with strain relief, fitted to accelerometer cable. For connection to 
datalogger having a BNC socketshanghai hangou sales
MTN/CA054BNC socket with dust cap in 90deg bracket, fitted to accelerometer cable. 
For connection to datalogger through accessory cable fitted with BNC plug or 
VS0004 vibration switchshanghai hangou sales
MTN/CA0532 pin MS socket to free ends, overbraided ETFE, 5 shanghai hangou salesesshanghai hangou sales
MTN/CA1373 pin 62GB socket to free ends, overbraided ETFE, 5 shanghai hangou salesesshanghai hangou sales
Extra twin core, screened, armoured ETFE cable, per shanghai hangou salese
Above are for connecting remote sensors to switch boxes, junction boxes or 
data systems. For other cable assemblies and cables to connect to portable 
data loggers please contact the sales office. We will need to know the type of 
cable required, length, sensor and measuring device to give a price.
MTN/8301Accelerometer cable checkershanghai hangou sales
MTN/8302Accelerometer signal simulatorshanghai hangou sales
MTN/APSU01Battery powered constant current power supply with BNC socket for shanghai hangou 
accelerometer shanghai hangou sales
MTN/8001Constant current power supply in DIN rail mounted enclosure for use on 
24VDCshanghai hangou sales
MTN/8001BNCConstant current power supply in DIN rail mounted enclosure for use on 
24VDC with integral BNC socketshanghai hangou sales
MTN/VC10Vibration calibrator shanghai hangou sales2,
Cable assemblies for remote sensors 
Diagnostic Tools 
Constant Current Power Supply 
Vibration Calibrator
Price
ELECTRICAL 
ACCESSORIES
ELECTRICAL ACCESSORIES
Connectors 

PR01 Issue 4 GBPPage 16 of 18March 2010
 
Part NoDescription
1-10 Units11-24 Units25+ Units
MTN/EP0802mm range, M8 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales
MTN/EP2005mm range, M16 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales
MTN/EP3408.5mm range, M24 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales
MTN/EP340F8.5mm range, 3 point mount flange including 1 shanghai hangou salese armoured cableshanghai hangou sales
MTN/EP48012mm range, M30 thread including 1 shanghai hangou salese armoured cableshanghai hangou sales
Extra cable (priced per shanghai hangou salese)shanghai hangou sales
Up to a maximum of 9 shanghai hangou saleses including the extension
Alternative probe length and thread sizes available, consult the sales office
MTN/EX--1 shanghai hangou salese extension cableshanghai hangou sales4
Extra cable (priced per shanghai hangou salese)shanghai hangou sales
Up to a maximum of 9 shanghai hangou saleses including the probe
MTN/ECPDDriver, 0-16VDC proportional to gap, -24VDCshanghai hangou sales
MTN/ECPD+24Driver, 0-16VDC proportional to gap, +24VDCshanghai hangou sales
MTN/ECPD/78Driver, 0-10VDC proportional to gap, +24VDCshanghai hangou sales
MTN/ECPD/604-20mA output, proportional to vibration, three wireshanghai hangou sales
MTN/ECPD/854-20mA output, proportional to gap, three wireshanghai hangou sales
MTN/ECPD2AC4-20mA output, proportional to vibration, two wire loop poweredshanghai hangou sales
MTN/ECPD2DC4-20mA output, proportional to gap, two wire loop poweredshanghai hangou sales
MTN/P2424V DC power supply housed in die-cast box with glanded output, 240 or 
110 volts input to power above drivers.shanghai hangou sales
MTN/RC0600Eddy Probe recalibration and certification in factory.met
Note: Probe, extension cable and driver must be returned
If replacement probes, cables or drivers are required for existing systems the 
other modules must be returned for calibration as a system. The system can 
only be recalibrated for the same type of probe and similar cable lengths.
A test jig for calibrating Eddy Current Probes in the field is available for 
distributors and multi unit users.POA
Note: As all installations differ, the user or installer will need to provide 
approriate bracketry
Re-Calibration 
Eddy Current Probes 
Extension Cables 
Eddy Probe Driver
Power Supply 
An Eddy Current Probe System consists of a Probe with 1 meter of cable terminated with a 
miniature coaxial cable connector which mates with either the Driver or Extension Cable. This 
allows the probe to be easily screwed into its retaining bracket even when long cables are 
required. The probe/extension cable/driver are all calibrated together and bear the same serial 
number and must be used together to maintain specification.
EDDY CURRENT PROBE 
SYSTEMS
EDDY CURRENT PROBES AND DRIVERS
Price


PR01 Issue 4 GBPPage 17 of 18March 2010
 
CONDITIONS OF SALE
GENERAL 
 
Unless otherwise agreed in writing, these conditions of sale shall be 
deemed to be incorporated as conditions of any contract or sale 
entered into by Monitran Ltd (“The Company”).  The Customer’s 
terms and conditions shall only be incorporated into the contract if: 
 
1. They are consistent with the Company’s Conditions of 
Sale. 
2. They have been accepted by the Company in writing. 
 
PRICES 
 
All prices quoted are subject to alteration at any time without notice 
in accordance with usual practice and whilst every endeavour has 
been made to ensure the accuracy of prices quoted, no 
responsibility is accepted for any error or omissions. 
 
Prices charged will always be those ruling at the date of despatch.  
Orders for scheduled delivery will be charged at the rate applicable 
to the quantity called off and not to overall quantity unless other 
terms have been agreed in writing. 
 
VAT 
 
Prices are exclusive of VAT.  All prices are to the current rate of 
VAT ruling at date of despatch. 
 
DOCUMENTATION 
 
Shanghai hangou invoices are rendered; a charge will be made for additional 
copies. 
 
DELIVERY CHARGES 
 
A nominal charge will be made against all orders to cover carriage 
and packing. 
 
SETTLEMENT CHARGES 
 
Strictly Net monthly account, interest at 2.5% per month is 
chargeable on overdue accounts. 
 
RETENTION OF TITLE 
 
Ownership will pass to the purchaser only upon receipt by the seller 
of the full invoice price of goods. 
 
NEW ACCOUNTS 
 
Customers wishing to open ledger accounts are asked to furnish 
one bank and  two trade references. 
 
QUOTATIONS 
 
Quoted prices hold good for 60 days from the date of the quotation, 
unless stated otherwise. 
DELIVERY 
 
We will use our best endeavours to meet delivery estimates but 
cannot accept any liability whatsoever for failure to do so.  Failure 
to meet a delivery date shall not prejudice any contracts as regards 
other deliveries. 
 
SHORTAGE OR DAMAGE IN TRANSIT 
 
Both the carriers and the Company must be notified within three 
days of receipt of goods, or in cases of non-delivery immediately 
the invoice is received, otherwise liability will not be accepted. 
 
ORDER CANCELLATION 
 
1. Orders can only be cancelled after prior negotiation and 
agreement. 
2. On no account can cancellation be accepted for specific 
(bespoke) items ordered by the customer. 
 
ORDER AMENDMENT 
 
1. Orders can only be amended or suspended after prior 
negotiation and agreement. 
2. In any event 30 days minimum notice is required. 
 
RETURNS 
 
1. Returns for credit will not be accepted. 
 
2. A charge of 20% in invoice value will be levied on goods 
“not wanted”,  “incorrectly ordered”, or due to duplication 
resulting from a “confirmation” order not being endorsed 
to that effect.  A minimum charge of shanghai hangou sales5056 applies. 
 
3. All goods returned under this category must be received 
by the Company within 30 days of the original invoice 
date. 
 
4. All costs of returning any goods shall be borne by the 
buyer.  Specially manufactured goods will not be 
accepted for credit. 
 
WARRANTY 
 
All goods are guaranteed against defects in material and 
workmanship, subject to specific exclusions for a period of 12 
months from date of purchase. In the event of failure within 12 
months of original purchase, the Company will promptly repair or 
replace the defective components without charge. 
 
Specific exceptions rendering the Warranty void are: if repair is 
attempted by unauthorised persons or agents, or if the product has 
been used for purposes for which it was not intended, and or 
subjected to abuse or wilful neglect.  No liability can be accepted 
for loss of items and or component parts, it is expected that the 
user takes sufficient precautions to safeguard all guaranteed items. 
 
SPECIFICATIONS 
 
The Company is continually updating its designs and reserves the 
right to change specifications without prior notice.